Original abstract vector illustration of a NAS with two drive bays and a shield, representing security updates.

Synology DSM: Check the updates for SA-26:20 and SA-26:21

Checked on 20 November 2026. Synology has published two new security advisories for DSM: SA-26:20 (CVE-2026-123007) and SA-26:21 (CVE-2026-120382). Today’s release notes confirm fixes in DSM 7.3.2-86009 Update 6 and DSM 7.4.1-90080 Update 2. Distribution is staged; availability on an individual NAS may depend on its model, region and system status.

At a glance

If you run a Synology NAS with DSM, first note the model and complete DSM build number, then check each advisory separately. The release notes published on 20 November list both fixes in DSM 7.3.2-86009 Update 6 and DSM 7.4.1-90080 Update 2. Installation restarts the NAS, and the update may not appear immediately on every device. Synology still lists the fixes as ongoing for older DSM branches and BeeStation OS 1.5; different temporary mitigations apply until the relevant fix is available.

Overview of the DSM fixes on 20 November 2026: two security advisories, affected versions and staged rollout.
Original schematic version overview based on Synology security advisories and release notes; not a screenshot of DSM. Checked 20 November 2026.

What the two advisories report

SA-26:20 concerns CVE-2026-123007 in NGINX configurations that use HTTP/2. Synology describes possible file read or write and denial-of-service impacts. The detailed CVSS score is 8.1, although the advisory overview rates several affected product lines as critical. Synology’s temporary mitigation is to disable HTTP/2 under “Control Panel > Network > Connectivity”. This may affect services that depend on HTTP/2, so check your own environment before changing it.

SA-26:21 concerns CVE-2026-120382 in the DSM OAuth API. Synology describes a command-injection flaw that could let a remote attacker read or write files or cause denial of service. The vendor lists CVSS 9.8 and recommends disabling the OAuth Service package as a temporary mitigation. First check whether any logins or applications depend on that package. The two mitigations address different issues: disabling HTTP/2 does not replace the OAuth measure, or vice versa.

Neither advisory reports confirmed exploitation of these two specific vulnerabilities in ongoing attacks. Their severity and potential impact still warrant a prompt check. A fix released for one DSM branch is not automatically available for older branches or other Synology products.

Affected versions and today’s patch status

Synology advisories and DSM release notes, checked 20 November 2026
AdvisoryVulnerabilityDSM 7.3DSM 7.4Other product branches in the advisory
SA-26:20CVE-2026-123007 · HTTP/2/NGINX7.3.2-86009 Update 6; release notes list the fix7.4.1-90080 Update 2; release notes list the fixDSM 7.2.1/7.2.2, 7.1, APM, BeeStation OS 1.5 and DSM Enterprise: still ongoing; SRM 1.2/1.3 not affected
SA-26:21CVE-2026-120382 · OAuth API7.3.2-86009 Update 6; release notes list the fix7.4.1-90080 Update 2; release notes list the fixDSM 7.2.1/7.2.2, DSM 7.1 and BeeStation OS 1.5: still ongoing; APM 1.2/2.0, DSM Enterprise 1.0 and SRM 1.2/1.3 not affected

The difference between “fixed for a DSM branch” and “available on every device” matters: Synology says rollout is staged. DSM may also withhold an update when its status checks determine that a device does not need it. The release notes say installation restarts the NAS. Select an installation file only after matching it to the exact model in Synology Download Center.

How to check your NAS

  1. Note the model and DSM version including build number in the information center.
  2. Open the current DSM release note for exactly this product branch and search for Synology-SA-26:20 and SA-26:21.
  3. If the update is offered, schedule maintenance windows, check the status of backups and volumes and take into account the required restart.
  4. If not already displayed, check availability for model and region in the Synology Download Center. Only use a package designated for your own model.
  5. After installation, check the full build number again and find both advisory IDs in the release notes.

For DSM 7.2.1 and 7.2.2, Synology recommends upgrading to 7.3.2-86009-6 or later. Update 6, released on 20 November, meets that version threshold if the NAS model and upgrade path are supported. For DSM 7.1, BeeStation OS 1.5 and other variants still marked “ongoing”, the checked advisories do not yet list a completed fix. Apply a stated mitigation only after checking its effect, and continue to monitor the vendor’s guidance. This is not a blanket recommendation to disconnect a NAS or disable features without assessing the consequences.

Benefits and limitations of the update

  • Advantage:For DSM branches 7.3 and 7.4, the release notes today confirm corrections to both advisory IDs.
  • Border:Staggered distribution and model releases mean that an update does not appear everywhere at the same time.
  • Border:For several older or separate products, Synology continues to report work in progress; a version number from another branch is not a replacement.
  • Planning requirements:The update restarts the NAS. Services and user access should be considered in the maintenance window.

Frequently asked questions

Is DSM 7.3.2 Update 6 available for every Synology NAS?

No. The release notes mention a staggered rollout. Model, region and system status can influence when the update appears. Check the release and installation package for your exact model.

Can I combine the two temporary mitigations?

No. For SA-26:20, Synology calls disabling HTTP/2; for SA-26:21, disabling the OAuth service package. Check possible impacts and dependencies separately.

Where can I find guidance on the earlier Synology vulnerabilities?

The previous TechKompass article on SA-26:19 and the patch versions at the time covers other vulnerabilities and versions. Do not use it as a substitute for comparing the two new advisories.

Sources and verification method

Checked on 20 November 2026. This review compares the two Synology advisories, SA-26:20 and SA-26:21, DSM 7.3 and 7.4 release notes, and Synology’s archive of model-specific DSM installation packages. The overview above is drawn from those version details. No official video specifically explaining both new advisories and today’s DSM updates was found, so no generic or unrelated video is embedded.

Further:Synology DSM: previous patch versions for SA-26:19.

Back to blog

Leave a comment